+ Start a Discussion
Travis Lee 1Travis Lee 1 

Discover Lightning Actions Trailhead Challenge

When checking this challenge, I get an error stating that the quickContact Lightning Component could not be found. Including screenshots of the steps I took thus far. Any advice would be appreciated!

1. The Lightning component must be named quickContact (this comes as part of the package, confirmed in picture below)
User-added image

2. Create a new action with Label Quick Contact and Name Quick_Contact on the Account object that invokes the quickContact component. (confirmed in picture below)
User-added image
3. Add the appropriate interfaces to the quickContact component. (Hint: there are two.) (used the implements force:lightningquickaction AND the force:hasrecordid on line 1, confirmed in picture below)
User-added image

4. Add the action to the Account Layout page layout. (added in picture below)
User-added image
Best Answer chosen by Travis Lee 1
SandhyaSandhya (Salesforce Developers) 
Hi,

Please check if you have connected to same DE org where you have done  your work in the trailhead.To do this click on" launch your hands on  org" and select the DE org or trailhead playground where you have your work and then check challenge.

 OR

Go to Trailhead Profile -- settings -- make the DE org which you have worked as default then check the challenge.

Please refer below link how to take challenges in trailhead.

https://force.desk.com/customer/portal/articles/2643793-trailhead-profile-signup-login-faq?b_id=13478

Hope this helps you!

Please mark it as Best Answer if my reply was helpful. It will make it available for other as the proper solution.
 
Thanks and Regards
Sandhya

 

All Answers

SandhyaSandhya (Salesforce Developers) 
Hi,

Please check if you have connected to same DE org where you have done  your work in the trailhead.To do this click on" launch your hands on  org" and select the DE org or trailhead playground where you have your work and then check challenge.

 OR

Go to Trailhead Profile -- settings -- make the DE org which you have worked as default then check the challenge.

Please refer below link how to take challenges in trailhead.

https://force.desk.com/customer/portal/articles/2643793-trailhead-profile-signup-login-faq?b_id=13478

Hope this helps you!

Please mark it as Best Answer if my reply was helpful. It will make it available for other as the proper solution.
 
Thanks and Regards
Sandhya

 
This was selected as the best answer
Travis Lee 1Travis Lee 1
Thanks Sandhya! Turns out I hadn't noticed their new UI change that defaults a "practice org" instead of my personal developer edition.
reneejones816reneejones816
I am having an issue with this trail head challenge.  I keep getting the error Challenge Not yet complete... here's what's wrong: 
The Action 'Quick Contact' was not found on the 'Salesforce1 and Lightning Experience Actions' section of the 'Account Layout' page layout. Please follow the requirements and ensure everything is setup correctly. 

I have the Component named quickContact, The Action is on the page layout and is named Quick Contact.  I changed the interface on the component I believe I have done everything on each of the strings for this challenge I even checked to make sure the Dev org was the default for my trailhead account.  
Bryan Lubic 2Bryan Lubic 2

Hey Travis, Just wanted to say thank you for posting this question.

I'm working through the same challenge now, but I was overlooking the first snippets of code to add the appropriate interfaces.

When I looked through your question, especially the screenshots, it helped me see what I was missing. (Kind of obvious, I was just moving too fast I think!).

Anyway, just wanted to say thanks for posting, and to let you know your question helped me with a question I had too.

Thank you!

Bryan

Pavlo ShchurPavlo Shchur
Hi everyone, I have done everything correctly and also O have read all the above posts, but I a mreceivinf the following message

There was an unhandled exception. Please reference ID: PZYVKHZV. Error: Faraday::ClientError. Message: MALFORMED_QUERY: When retrieving results with Metadata or FullName fields, the query qualificatio​ns must specify no more than one row for retrieval. Result size: 2
Marta Szymanska 10Marta Szymanska 10
Can you help me? Why I have that problem with saving;
User-added image
 
Devang Shah 50Devang Shah 50
I'll go over this and definitely let you know. For Android releated content you can check out WhatDroid (https://whatdroid.com)
asfasf asfsafasfasf asfsaf
He Action is at the web page format and is called Quick Contact.  I changed the interface at the issue I believe I have achieved the whole thing on every of the strings for this project (https://fashionretrieve.com/) I even checked to make certain the Dev org turned into the default for my trailhead account.
hiren Aminhiren Amin
I'm disapproving of this path head challenge. I continue to get the mistake Challenge Not yet complete... this is what's off-base: 

The Action 'Snappy Contact' was not found on the 'Salesforce1 and Lightning Experience Actions' segment of the 'Record Layout' page format. If it's not too much trouble, follow the necessities and guarantee everything fake grass (https://www.konzeptgarden.com/artificial-carpet-grass-supplier-malaysia) is arrangement effectively. 

I have the Component named quickContact, The Action is on the page format and is named Quick Contact. I changed the interface on the segment I trust I have done everything on every one of the strings for this test I even checked to ensure the Dev organization was the default for my trailhead account.
ani ghoani gho
3 steps are required to complete this challenge  after you have installed the package install
1....go to developer console File ---> open Resource --- search for quckcontact.cmp
The first line is as
From
<aura:component controller="QuickContactController">


change to 

<aura:component controller="QuickContactController" implements="force:lightningQuickAction,force:hasRecordId">
2...go to setup objectmanager click Account---------->click buttons link action---> new action  as shown below


newAction


3  Add the above to the pagelayout as shown follow step 1 2 3....
as shown on below image

pagelayout
 
MineCraft DabMineCraft Dab
Create a Lightning Action
To complete this challenge, you need to add a Lightning component to your org. Then use that component to create a Lightning action on the Account object. When the action’s button is clicked, it creates a new contact based on form input. To get started, install this package that contains the component bundle that you'll need to modify. (https://minecraftdab.com)
The Lightning component must be named quickContact. (Does this name need to include the capital C in contact? It is loaded as all lowercase) 
Add the appropriate interfaces to the quickContact component. (Hint: there are two.) What does this mean?  Is this referring to editing the code?
Create a new action with Label Quick Contact and Name Quick_Contact on the Account object that invokes the quickContact component.

From Mine (https://minecraftdab.com)
Thanks

 
ella macrowella macrow
Create a Lightning Action
To complete this challenge, (https://hairdryerprotips.com/hair-dryers-for-african-american-hair/) you need to add a Lightning component to your org. Then use that component to create a Lightning action on the Account object. When the action’s button is clicked, it creates a new contact based on form input. To get started, install this package that contains the component bundle that you'll need to modify. (https://minecraftdab.com)
The Lightning component must be named quickContact. (Does this name need to include the capital C in contact? It is loaded as all lowercase) 
Add the appropriate interfaces to the quickContact component. (Hint: there are two.) What does this mean?  Is this referring to editing the code?
Create a new action with Label Quick Contact and Name Quick_Contact on the Account object that invokes the quickContact component.
I agree with your answer.
Rilee WallerRilee Waller
I am having an issue with changing the layout of the about (https://below-software.de/bricscad/bricscad-versionen/)page for wordpress site.
gfdehbg gvfdhfgfdehbg gvfdhf
If you wanna change this code I will suggest you to click here (https://prosheffieldremovals.co.uk/office-removals-sheffield/) and you will get some best application that are providing this service.