function readOnly(count){ }
Starting November 20, the site will be set to read-only. On December 4, 2023,
forum discussions will move to the Trailblazer Community.
+ Start a Discussion
VanitaKedarVanitaKedar 

There was an unexpected error while verifying this challenge. Usually this is due to some pre-existing configuration or code in the challenge Org. We recommend using a new Developer Edition (DE) to check

I am working on Spperbatge and received this error


Challenge Not yet complete... here's what's wrong: 
There was an unexpected error while verifying this challenge. Usually this is due to some pre-existing configuration or code in the challenge Org. We recommend using a new Developer Edition (DE) to check this challenge. If you're using a new DE and seeing this error, please post to the developer forums and reference error id: TYCBVJOO
Close errors

Expedite help is appreciated. I am stuck due to this error.
PS: I am working on new Org.

Thanl you,
Vanita Kedar
Best Answer chosen by VanitaKedar
VanitaKedarVanitaKedar
Thanks for reply

But I found different solution

We have to follow dashboard developement in following sequence for reports and dashboard superbatch challege steps 7 and 8.

1. create dashboard and save --> wait for few secords
2. add first component, save and done --> wait for few secords
3. refresh dashboard --> wait for a min
4. go back to challenge window and test your challenge on step 7/8..

Case 1 - If any error in first component, then fix error going back to dashboard and reppeat step 2-4 for added component's testing and move further adding next components.

Case 2- if you are through successfully for first component and  received error for 2nd component is missing and so on, then follow and repeat step 2-4 for next 4 components one by one. this help to resolve above issue , also saves lot of debug time.

also saves lot of energy and time to rework on all steps 1-6 from superbatch in new org or playgroud.to resolve this error.

Hope this works for everyone. If at all then mark this answer as best answer for future reference to others,

thank you,
vanita Kedar.


 

All Answers

VanitaKedarVanitaKedar
I am working on 

Superbadge
Lightning Experience Reports & Dashboards Specialist
Design powerful reports and an eye-catching dashboard to shine a light on your data.

Step 7 !
VanitaKedarVanitaKedar
As soon as I try and add new component on dash board I start receiving this eeror..once those components are removed.. only dahboard testing works fine.,,


They only says 
Challenge Not yet complete... here's what's wrong: 
We can’t find the component 'SolarBot Pipeline by Stage' using the correct report on the 'SolarBot Impact Dashboard'.

is this due to components refered through report?

Tried with cleaning cache, logout and restert everything... No luck
VanitaKedarVanitaKedar
please ref to my question 

https://developer.salesforce.com/forums/ForumsMain?id=9062I000000IKwTQAW
Khan AnasKhan Anas (Salesforce Developers) 
Hi Vanita,

Greetings to you!

Make sure that you have done all the steps correctly. Because this error usually comes whenever you miss some or the other step.

I suggest you please REFRESH THE DASHBOARDS before checking up the challenge.

Also, this kind of error pops up due to renaming reports or dashboards label after creation or when you Clone dashboards. Thus for any further challenges: DO NOT CLONE Dashboards or Reports. Always create from scratch.

Try these steps:
  • Delete the existing dashboards/reports.
  • Delete it from the bin as well.
  • Create new dashboards/reports.
  • Refresh dashboards before checking up the challenge.
  • Check Challenge.

You can also refer to the below link from developer forums with a similar discussion which might help you further with the above issue.

https://developer.salesforce.com/forums/ForumsMain?id=9060G0000005mO7

I hope it helps you.

Kindly let me inform if it helps you and close your query by marking it as solved so that it can help others in the future. It will help to keep this community clean.

Thanks and Regards,
Khan Anas
VanitaKedarVanitaKedar
Thanks for reply

But I found different solution

We have to follow dashboard developement in following sequence for reports and dashboard superbatch challege steps 7 and 8.

1. create dashboard and save --> wait for few secords
2. add first component, save and done --> wait for few secords
3. refresh dashboard --> wait for a min
4. go back to challenge window and test your challenge on step 7/8..

Case 1 - If any error in first component, then fix error going back to dashboard and reppeat step 2-4 for added component's testing and move further adding next components.

Case 2- if you are through successfully for first component and  received error for 2nd component is missing and so on, then follow and repeat step 2-4 for next 4 components one by one. this help to resolve above issue , also saves lot of debug time.

also saves lot of energy and time to rework on all steps 1-6 from superbatch in new org or playgroud.to resolve this error.

Hope this works for everyone. If at all then mark this answer as best answer for future reference to others,

thank you,
vanita Kedar.


 
This was selected as the best answer