function readOnly(count){ }
Starting November 20, the site will be set to read-only. On December 4, 2023,
forum discussions will move to the Trailblazer Community.
+ Start a Discussion
Emilien Guichard 51Emilien Guichard 51 

Billing specialist superbadge

Hello there,

I am stuck at the second step in the Billing Specialist superbadge with the following error : 
Challenge Not yet complete... here's what's wrong: 
We couldn't find the Consumption Schedule named 'Panel Maintenance Request'. Please make sure the Consumption Schedule exists, the record contains the correct values according to the requirements and please try again.

I do have created a Consumption Schedule related to Major Solar Panel product :
User-added imagewith the following Consumption Rates :
User-added imageUser-added image
Emilien Guichard 51Emilien Guichard 51
Do anyone have an idea what is going wrong here?

Thanks a lot for your help!
richard cook 1richard cook 1
I am experiencing the same erorr. I have tried multiple permutations on the Consumption Schedule / Rates but cannot get past the first check
Ayman ShaikhAyman Shaikh
Even I am experiencing the same error, tried every possible things.
Emilien Guichard 51Emilien Guichard 51
Maybe this thread will help us all :)
https://success.salesforce.com/answers?id=9063A000000plDwQAI
Ritesh001Ritesh001
Hi @Emilien Guichard 51
Was you able to get the error,
I am facing the same error

User-added image

User-added image
Shilpa Vashishtha 9Shilpa Vashishtha 9
Hi,
I have completed this challenge recently and sharing the actual implementation of this challenge.
There are few things which are not listed in the requirement but we have to take care of them.
1. Add values Micron and Request in the global picklist "Unit of measure" as well othr than picklist of mentioned consumption schedule objects.
2. Add pre-created values for Billing rule, tax rule and revenue recognition rule for both consumption schedules.
3. Add product as "SolarBot" in both consumption schedule.

User-added image


User-added image

Hope this helps.

Thanks
 
Fnu Khaja ameenuddinFnu Khaja ameenuddin

HI @Shilpa, could you please guide here.....what attributes should i add on Step 2......looking forward for your response.

Thanks,

AK

Javier Hary 7Javier Hary 7
Hi @Shilpa, thanks for your help. I´ve just pass the challenge.

For both Consumption Schedules the configuration is what Shilpa indicates. I add this images because for Billing Term I switch from 12 to 1 in order to pass.
User-added image
User-added image

Don´t forget to change the Consumption Schedule page assignment to 'Billing Consumption Schedule Layout'.

Regards,
Rachel OBrien 8Rachel OBrien 8
Hi @Shilpa, that really helped. I was all most there but had 12 in the billing term (as the field notes said to put a 12 if the Billing Term Unit was month) - changed it to 1, fixed a typo in my picklist and WHOOHOO, on we go!
RAJESH KAMAT 2RAJESH KAMAT 2
Hello,

I have completed up to challenge 4 and now am adding products to the quote.
I can add and save all products except SolarBots. When I add SolarBots to the quote, it shows in the cart but when I try to save the quote or click Calculate, it throws an error...

Attempt to de-reference a null object
(SBQQ)

See screenshot attached. I would really appreciate your help/pointers to overcome this issue.

Thanks.User-added image
Ramees V PRamees V P
I'm getting following error on challenge 5
Challenge Not yet complete... here's what's wrong:
We couldn't find the correct setting for Tax Calculation on the Billing Managed Package settings. Please make sure the value is correct according to the requirements and please try again.
Shobha JamesShobha James
User-added imageHi all,
Could some one please help on this ,i am on challenge 15  created 2 Orders,creted usage summary and Usage for the first order,added the Legal entity,ceated the invoice of Amount 52,500 for second order (please find the images)
User-added image
User-added image
But when in the relates list of Account the Invoice balance is 47800,i think i did something wrong in payment allocation..(now i can am not able to edit payment or invoice ,i am not able to delete the order also getting the error like because there is active invoice you can noet delete the order ,when i try to delete or edit the invoice i am getting the error like you can not edit the invoice one it is posted )


User-added image
Please some one help me, trying to finish this challenge 15 from past 2 weeks

Thanks,
Shobha
RKRIVERARKRIVERA
Hi,

I've been trying to complete challenge 15 for the past day and I can't figure out what wrong. At the moment when I update the quote status to approved I'm getting 3 orders instead of 2. Any ideas?
Sambit Rout 26Sambit Rout 26
Thanks everyone for the post ! I was making a mistake of giving 12 instead of 1 in the billing term. 
SAKTHIVEL PERUMALSAKTHIVEL PERUMAL
@ Shilpa Vashishtha - I am getting the below error in challenge 15 ? Can you help here ?

Challenge Not yet complete... here's what's wrong:
We couldn't find the Order Product linked to the Quote named 'Q-00015', for the Product 'SolarBots' and correct Tax Treatment. Please make sure the record exists, it contains the correct values according to the requirements (Product Name, Tax Treatment Name, any record value), and please try again.
yelice carvajalyelice carvajal
Hi @Shilpa, really helpfull your information¡
Best R
Yeli
Rajesh Yandrathi 1Rajesh Yandrathi 1
Challenge 2

There are few things which are not listed in the requirement but we have to take care of them.
1. Add values Micron and Request in the global picklist "Unit of measure" as well othr than picklist of mentioned consumption schedule objects.
2. Add pre-created values for Billing rule, tax rule and revenue recognition rule for both consumption schedules.
3. Add product as "SolarBot" in both consumption schedule.
Rajesh Yandrathi 1Rajesh Yandrathi 1
Challenge 3
Product: Major Solar Panel Rental
Subscription Pricing:Fixed Price
Subscription Term:1
Percent Of Total Base:List
Subscription Type:Renewable

Charge Type:Recurring
Billing Frequency:Monthly
Billing Type:Advance

Create a price book for this product
with list price as 200.

Done - Successful
Swapnil Pal 5Swapnil Pal 5
User-added imageUser-added imageAm getting this error as shown below: Pleasse can you tell where I might be going wrong?
User-added image
MPB SalesforceMPB Salesforce
If you have any confusion so visite this link
https://www.youtube.com/watch?v=uVIO9fbyqnI&list=PLQf_Kv-dMRBKHpvkgwWOtKkhh6UL5tK4_&index=17
MPB SalesforceMPB Salesforce
****************************************************************************************************************************************
*****************************************************************************************************************************************
For pass this challenge visit this link
https://www.youtube.com/watch?v=uVIO9fbyqnI&list=PLQf_Kv-dMRBKHpvkgwWOtKkhh6UL5tK4_&index=13


*********************************************************************************************************************************************
***********************************************************************************************************************************************
Tharak PaidiTharak Paidi
Challenge 8: In the process builder I got this error.. 
Not yet complete... here's what's wrong:
Almost there, but we couldn't find the correct settings in the 'Update Invoice Batch' action inside the 'Order Invoice Preparation' process builder flow. The White Glove Customer criteria are not quite correct. Please check if the flow has the correct criteria and correct actions according to the requirements, and try again.
Naidu TrailheadNaidu Trailhead
@Tharak Paidi, Hi, Did you get the challenge complete? Even i stuck with the same error and please can you or any one guide in fixing the issue?
Sowndarya Lakshmi SankararamanSowndarya Lakshmi Sankararaman
Hi, I am encountering below issue when attempting for challenge 3 at Billing Specialist Superbadge and hence unable to proceed further.
User-added image
Text version for error: "Challenge Not yet complete... here's what's wrong:
We couldn't find the required fields for object Category. Please ensure the field was created according to the requirements and try again."

Any help would be much appreciated.
Ravikumar RamalingamRavikumar Ramalingam
Hi @shilpa , I tried all the steps you mentioned. But i still have the same error. Am i missing something

User-added image
Prasanna MarinaPrasanna Marina
Hi @all can any one help this 
User-added image
i have given all  fields 
User-added image
User-added image
can any one help with this  iam trying so manys days onwards.
Thanks in advance.