Apex Code Development You need to sign in to do that
Don't have an account?
yang huimin China abrasive tools for metal maintenance and maintenance common sense summary?
China abrasive tools for metal and equipment, mechanical parts are all metal components, wear and tear in the long-term use, if the daily maintenance work is done, can reduce the damage of the parts, then what are the maintenance and maintenance work of the grinding tools?
Summer is a hot season, and our metal grinding tools work day and night, and it is also a high temperature machine. In this case, the old and new problems of metal grinding tools will come. So, what should we do if the summer heat is not really coming?
Recently, the technical department of Aurora Abrasives has put forward its own views on repairing metal grinding tools for many years in summer. Please follow the small series to learn these common senses.
1. Clean the metal grinding tool. First clean the inside and outside of the metal grinding tool accessories. The joints of the body, grinding ring, motor, belt, gear, etc., and all the places that can be cleaned should be cleaned up.
2. During the cleaning process of the metal grinding tool, it should be noted that the bolts of each joint are found to be complete. Whether it is loose or not.
3, the metal grinding tool equipment failures into a table, whether it is old problems or new problems, must be easy to difficult, individually excluded.
4. After the fault is removed, it is necessary to carry out maintenance on the whole machine, and add butter to the lubrication point. At the same time, according to the requirements of the manual, the lubricant should be replaced according to the quantity. Gear oil, etc.
Summer is a hot season, and our metal grinding tools work day and night, and it is also a high temperature machine. In this case, the old and new problems of metal grinding tools will come. So, what should we do if the summer heat is not really coming?
Recently, the technical department of Aurora Abrasives has put forward its own views on repairing metal grinding tools for many years in summer. Please follow the small series to learn these common senses.
1. Clean the metal grinding tool. First clean the inside and outside of the metal grinding tool accessories. The joints of the body, grinding ring, motor, belt, gear, etc., and all the places that can be cleaned should be cleaned up.
2. During the cleaning process of the metal grinding tool, it should be noted that the bolts of each joint are found to be complete. Whether it is loose or not.
3, the metal grinding tool equipment failures into a table, whether it is old problems or new problems, must be easy to difficult, individually excluded.
4. After the fault is removed, it is necessary to carry out maintenance on the whole machine, and add butter to the lubrication point. At the same time, according to the requirements of the manual, the lubricant should be replaced according to the quantity. Gear oil, etc.