function readOnly(count){ }
Starting November 20, the site will be set to read-only. On December 4, 2023,
forum discussions will move to the Trailblazer Community.
+ Start a Discussion
alo sen 12alo sen 12 

'High Value Opportunities' error

Anyone encountered this error? Is this filter not correct?
Challenge not yet complete... here's what's wrong: 
Please check that you have a filter for Stages that are not equal to Closed Won or Closed Lost.


Filter Logic:1 AND (2 AND 3)

 
1. Amount greater than ""25,000""

 
2. Stage not equal to "Closed Won"

 
3. Stage not equal to "Closed Lost"

 
Best Answer chosen by alo sen 12
Amit Chaudhary 8Amit Chaudhary 8

I think the problem is the language setting. When I change to US Numeber style "." as decimal and not "," as in europa it work.
Please check below post. I hope that will help you.
https://developer.salesforce.com/forums/?id=906F0000000BIZEIA4
Your Report should be like bwlow 
User-added image

Please mark this as solution if this will help you. So that is some one has same issue this post can help.

Thanks
Amit Chaudhary
amit.salesforce21@gmail.com

All Answers

Amit Chaudhary 8Amit Chaudhary 8

I think the problem is the language setting. When I change to US Numeber style "." as decimal and not "," as in europa it work.
Please check below post. I hope that will help you.
https://developer.salesforce.com/forums/?id=906F0000000BIZEIA4
Your Report should be like bwlow 
User-added image

Please mark this as solution if this will help you. So that is some one has same issue this post can help.

Thanks
Amit Chaudhary
amit.salesforce21@gmail.com
This was selected as the best answer
alo sen 12alo sen 12
Thank you so much. The filter did need to look like yours and it worked.
Holger Buchner 8Holger Buchner 8
Many thanks, was struggeling with my EUR Org as well.
Amit Chaudhary 8Amit Chaudhary 8
Hi Holger Buchner 8,

Please check below post. I hope this will help you.
https://developer.salesforce.com/forums/?id=906F0000000BIZEIA4

NOTE:- your need to change locale and language settings in your personal settings