Sign Up ›
  • TankGirl
  • NEWBIE
  • 5 Points
  • Member since 2010
  • Chatter
    Feed
  • 0
    Best Answers
  • 0
    Likes Received
  • 0
    Likes Given
  • 4
    Questions
  • 10
    Replies
2 replies

unable to update custome setting from force.com sites

Ok i give up and need some help....

 

I have pageRefrenece method that needs to generate a list of strings for the search auto complete to use, based on search params and cache time. (This is all using force.com sites) So when the user goes to search i first check to see if any of the params have changed by comparing them to a saved custom setting that holds the last searched data. If its a new search or one of the params have changed, the method updates the list of strings accordingly and then updates the custom setting with the new search params... this is where it is failing.

 

As a part of trouble shooting i took the block of code and put it in the Execute Anonymous and ran it with more system.debug lines to see why it might be failing.... but no error this time. In the system logs for the page, when i run it i see the error System.LimitException: DML currently not allowed as shown below:

 

16:06:07.604 (2914726000)|STATEMENT_EXECUTE|[482]|Try
16:06:07.604 (2914754000)|STATEMENT_EXECUTE|[482]|Block with 2 statements
16:06:07.604 (2914795000)|STATEMENT_EXECUTE|[483]|database.update(SOBJECT:SelfServiceSettings__c)
16:06:07.604 (2915155000)|METHOD_ENTRY|[483]|Database.update(SObject)
16:06:07.604 (2915213000)|HEAP_ALLOCATE|[483]|Bytes:8
16:06:07.604 (2915246000)|DML_BEGIN|[483]|Op:Update|Type:SelfServiceSettings__c|Rows:1
16:06:07.604 (2915291000)|EXCEPTION_THROWN|[483]|System.LimitException: DML currently not allowed
16:06:07.604 (2915384000)|METHOD_EXIT|[483]|Database.update(SObject)
16:06:07.605 (2915453000)|METHOD_EXIT|[493]|SelfServiceTemplateCon.titleSearch()
16:06:07.605 (2915490000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED

 

but when i run the block in the Execute Anonymous the logs dont show the same error:

 

15:58:57.903 (129162000)|STATEMENT_EXECUTE|[27]|Try
15:58:57.903 (129190000)|STATEMENT_EXECUTE|[27]|Block with 2 statements
15:58:57.903 (129240000)|STATEMENT_EXECUTE|[28]|database.update(SOBJECT:SelfServiceSettings__c)
15:58:57.903 (129275000)|METHOD_ENTRY|[28]|Database.update(SObject)
15:58:57.903 (129344000)|HEAP_ALLOCATE|[28]|Bytes:8
15:58:57.904 (129386000)|DML_BEGIN|[28]|Op:Update|Type:SelfServiceSettings__c|Rows:1
15:58:57.904 (129529000)|HEAP_ALLOCATE|[EXTERNAL]|Bytes:8
15:58:57.930 (156215000)|DML_END|[28]
15:58:57.930 (156272000)|METHOD_EXIT|[28]|Database.update(SObject)
15:58:57.930 (156324000)|STATEMENT_EXECUTE|[29]|system.debug(String)

 

I thought the issue might be the 'with sharing' i had on the class but it still failed even when i removed that...

 

here is the code....

 

string lang = 'en';
string prod = 'lmipro2';
list<string> titleListToShow = new List<string>();
List<string> doctypes = new List<string>();
//normally more than one added to list but for testing lets just deal with one
doctypes.add('Video__kav');	
if(selfservicehelperclass.seeIfNewListIsNeeded(doctypes, lang, prod) || titleListToShow == null){
  titleListToShow = selfservicehelperclass.getAllTitleLists(doctypes, lang, prod);
  system.debug('\n\n in titleSearch titleListToShow: ' + titleListToShow + '\n\n ');
  string dcToSave;
  for(string stype: doctypes){
    if(selfservicehelperclass.CheckForNullString(dcToSave)){
      dcToSave = dcToSave + ',' + stype;
    }else{
      dcToSave = stype;
    }
  }
  system.debug('\n\n in titleSearch dcToSave: ' + dcToSave + '\n\n ');
  SelfServiceSettings__c selfSerSet = SelfServiceSettings__c.getOrgDefaults();
  system.debug('\n\n in titleSearch selfSerSet before update: ' + selfSerSet + '\n\n ');
  selfSerSet.LastTitleSearch__c = datetime.now();
  selfSerSet.docTypesSearched__c = dcToSave;
  try{
    database.update(selfSerSet);
    system.debug('\n\n in titleSearch sss: ' + selfSerSet + '\n\n ');
  }catch(exception e){
    system.debug('\n\n in titleSearch e: ' + e + '\n\n ');
  }
}

 

 

3 replies

Issue with Apex:outputlink and forced click

Problem:

I have a search field in the case view that needs to search and redirect to a 'full search' page when a users hits enter in the field.

 

The enter part isn't an issue, the issue is that since this is inside the case layout page, I can not use a commandbutton/ commandlink since if I do it would redirect to the page but it will show inline=1 in the URL and thus treat it as an inline page and hide the header/sidebar. If I use the output link it will go to the page and not add inline=1 in the URL and show the header. BUT if I use the outputlink, when I force a click on the button, it performs the method, but not the redirect, so it just sits there.

 

In my method I put in system.debug and watched the system log, it showed that it did reach the method and did what was in it, but once it got to the return part with the new page reference, it just didn't do it. If I were to physically click the button instead of having the event listener do a jQuery .click() it will refresh to the new page.

 

To make sure it was nothing on the page that was wrong, or to see if it was just an outputlink, I did a test page with just simple methods and nothing in it but the required for testing. First i tested the commandlink/commandbutton:

 

 

<apex:page controller="LinkOnClickCon">
<apex:includeScript value="{!URLFOR($Resource.knowledgeTicket, '/jquery-1.4.2.min.js')}"/>
<script type="text/javascript" language="JavaScript">
jQuery.noConflict();
jQuery(document).ready(function() {
jQuery('.searchtoolstextbox').keypress(function(e) {
	code = e.keyCode ? e.keyCode : e.which;
	//alert(code.toString());
	if (code.toString() == 13){
		e.preventDefault();
		if(jQuery('.searchtoolstextbox').val().length >= 3){
			jQuery('.fullsearchbutton').click();		 		
		}
	}			  
});
}); 
</script>
<apex:form id="form">
	<apex:inputText id="kbsearchtext" value="{!userkeywords}" styleClass="searchtoolstextbox" />
	<apex:actionRegion id="FullSearchActionRegion">
		<apex:commandlink id="btnFullSearch1" styleClass="btn fullsearchbutton" action="{!getactionTwo}" onclick="alert('I was clicked');" value="Full Search">
			<apex:actionSupport event="onClick" action="{!getactionTwo}" status="workstatus" />
		</apex:commandlink>
	</apex:actionRegion> 			
<apex:actionStatus id="workstatus" startText="working..." stopText="" />
</apex:form>
</apex:page>

 

 

and controller:

 

public with sharing class LinkOnClickCon {

public string userkeywords{get; set;}

Public pagereference getactionTwo(){
	system.debug('\n ACTION Two METHOD userkeywords: '+userkeywords+'\n The enter key was clicked and so this should now be called.');
	string kywrds = userKeywords; 
	if(kywrds == NULL || kywrds == ''){kywrds = 'keyword';}
	kywrds = EncodingUtil.urlEncode(kywrds, 'UTF-8');
	system.debug('\n\n METHOD getactionTwo() - keywords: ' + kywrds + '\n \n');
	PageReference ref = new PageReference('/apex/knowledge?keywords=' + kywrds );
	system.debug('\n\n METHOD getactionTwo() - pageRef: ' + ref.getUrl() + '\n \n');
	ref.setRedirect(true);
	return ref;
}
}

 With the commandlink/command button it works, it redirects to the new page (but like I said earlier, if I use this in the case layout it will redirect with a URL pram of inline=1 witch is bad).

 

The system log:

 

 

19.0 APEX_CODE,FINEST;APEX_PROFILING,INFO;CALLOUT,INFO;DB,INFO;VALIDATION,INFO;WORKFLOW,INFO
11:51:36.499 (18334000)|EXECUTION_STARTED
11:51:36.499 (18404000)|CODE_UNIT_STARTED|[EXTERNAL]|066Q00000008nD9|VF: /apex/linkonclick
11:51:36.499 (18701000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(userkeywords)
11:51:36.499 (18733000)|SYSTEM_MODE_ENTER|APEX_FULL
11:51:36.500 (19058000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|userkeywords
11:51:36.500 (19090000)|CODE_UNIT_FINISHED|userkeywords
11:51:36.500 (19126000)|CODE_UNIT_FINISHED|LinkOnClickCon get(userkeywords)
11:51:36.501 (20273000)|CODE_UNIT_STARTED|[EXTERNAL]|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20308000)|SYSTEM_MODE_ENTER|APEX_FULL
11:51:36.501 (20603000)|CODE_UNIT_STARTED|[EXTERNAL]|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20648000)|METHOD_ENTRY|[1]|01pQ0000000DK56|LinkOnClickCon.LinkOnClickCon()
11:51:36.501 (20687000)|STATEMENT_EXECUTE|[1]|Static initialization: LinkOnClickCon
11:51:36.501 (20716000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
11:51:36.501 (20755000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
11:51:36.501 (20787000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
11:51:36.501 (20812000)|METHOD_EXIT|[1]|LinkOnClickCon
11:51:36.501 (20856000)|CODE_UNIT_FINISHED|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20883000)|CODE_UNIT_FINISHED|LinkOnClickCon set(userkeywords,offline)
11:51:36.502 (21653000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon invoke(getactionTwo)
11:51:36.502 (21758000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{"userkeywords":"offline"}|0x1efb058
11:51:36.502 (21795000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
11:51:36.502 (21828000)|STATEMENT_EXECUTE|[5]|Block with 9 statements
11:51:36.502 (21888000)|STATEMENT_EXECUTE|[6]|system.debug(String)
11:51:36.502 (21924000)|METHOD_ENTRY|[6]|System.debug(ANY)
11:51:36.502 (21969000)|HEAP_ALLOCATE|[6]|Bytes:41
11:51:36.503 (22010000)|HEAP_ALLOCATE|[6]|Bytes:102
11:51:36.503 (22039000)|USER_DEBUG|[6]|DEBUG|
 ACTION Two METHOD userkeywords: offline
 The enter key was clicked and so this should now be called.
11:51:36.503 (22072000)|METHOD_EXIT|[6]|System.debug(ANY)
11:51:36.503 (22127000)|STATEMENT_EXECUTE|[7]|DeclareVar: String kywrds
11:51:36.503 (22157000)|VARIABLE_SCOPE_BEGIN|[7]|kywrds|String|false
11:51:36.503 (22201000)|VARIABLE_ASSIGNMENT|[7]|kywrds|"offline"
11:51:36.503 (22232000)|VARIABLE_ASSIGNMENT|[7]|kywrds|"offline"
11:51:36.503 (22264000)|STATEMENT_EXECUTE|[8]|Condition
11:51:36.503 (22377000)|STATEMENT_EXECUTE|[8]|Condition
11:51:36.503 (22432000)|STATEMENT_EXECUTE|[9]|String kywrds <= MethodInvocation
11:51:36.503 (22476000)|METHOD_ENTRY|[9]|system.EncodingUtil.urlEncode(String, String)
11:51:36.503 (22524000)|STATEMENT_EXECUTE|[1]|Static initialization: system.EncodingUtil
11:51:36.503 (22571000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
11:51:36.503 (22607000)|VARIABLE_SCOPE_BEGIN|[9]|s|String|false
11:51:36.503 (22648000)|VARIABLE_ASSIGNMENT|[9]|s|"offline"
11:51:36.503 (22675000)|VARIABLE_SCOPE_BEGIN|[9]|enc|String|false
11:51:36.503 (22711000)|VARIABLE_ASSIGNMENT|[9]|enc|"UTF-8"
11:51:36.503 (22859000)|METHOD_EXIT|[9]|system.EncodingUtil.urlEncode(String, String)
11:51:36.503 (22899000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"offline"
11:51:36.503 (22929000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"offline"
11:51:36.503 (22978000)|STATEMENT_EXECUTE|[10]|system.debug(String)
11:51:36.504 (23023000)|METHOD_ENTRY|[10]|System.debug(ANY)
11:51:36.504 (23060000)|HEAP_ALLOCATE|[10]|Bytes:44
11:51:36.504 (23089000)|HEAP_ALLOCATE|[10]|Bytes:47
11:51:36.504 (23115000)|USER_DEBUG|[10]|DEBUG|

 METHOD getactionTwo() - keywords: offline
 

11:51:36.504 (23145000)|METHOD_EXIT|[10]|System.debug(ANY)
11:51:36.504 (23197000)|STATEMENT_EXECUTE|[11]|DeclareVar: System.PageReference ref
11:51:36.504 (23226000)|VARIABLE_SCOPE_BEGIN|[11]|ref|PageReference|true
11:51:36.504 (23267000)|HEAP_ALLOCATE|[11]|Bytes:32
11:51:36.504 (23358000)|HEAP_ALLOCATE|[11]|Bytes:38
11:51:36.504 (23432000)|STATEMENT_EXECUTE|[12]|system.debug(String)
11:51:36.504 (23465000)|METHOD_ENTRY|[12]|System.debug(ANY)
11:51:36.504 (23503000)|METHOD_ENTRY|[12]|System.PageReference.getUrl()
11:51:36.504 (23558000)|METHOD_EXIT|[12]|System.PageReference.getUrl()
11:51:36.504 (23587000)|HEAP_ALLOCATE|[12]|Bytes:68
11:51:36.504 (23615000)|HEAP_ALLOCATE|[12]|Bytes:71
11:51:36.504 (23641000)|USER_DEBUG|[12]|DEBUG|

 METHOD getactionTwo() - pageRef: /apex/knowledge?keywords=offline
 

11:51:36.504 (23671000)|METHOD_EXIT|[12]|System.debug(ANY)
11:51:36.504 (23720000)|STATEMENT_EXECUTE|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23754000)|METHOD_ENTRY|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23791000)|METHOD_EXIT|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23829000)|STATEMENT_EXECUTE|[14]|Return
11:51:36.504 (23871000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
11:51:36.504 (23923000)|CODE_UNIT_FINISHED|LinkOnClickCon invoke(getactionTwo)
11:51:36.504 (23999000)|VF_APEX_CALL|btnFullSearch1|{!getactionTwo}|PageReference:/apex/knowledge?keywords=offline
11:51:36.505|CUMULATIVE_LIMIT_USAGE
11:51:36.505|LIMIT_USAGE_FOR_NS|(default)|
  Number of SOQL queries: 0 out of 100
  Number of query rows: 0 out of 10000
  Number of SOSL queries: 0 out of 20
  Number of DML statements: 0 out of 100
  Number of DML rows: 0 out of 10000
  Number of script statements: 9 out of 200000
  Maximum heap size: 0 out of 3000000
  Number of callouts: 0 out of 10
  Number of Email Invocations: 0 out of 10
  Number of fields describes: 0 out of 100
  Number of record type describes: 0 out of 100
  Number of child relationships describes: 0 out of 100
  Number of picklist describes: 0 out of 100
  Number of future calls: 0 out of 10
  Number of find similar calls: 0 out of 10
  Number of System.runAs() invocations: 0 out of 20

11:51:36.505|CUMULATIVE_LIMIT_USAGE_END

11:51:36.505 (24720000)|CODE_UNIT_FINISHED|VF: /apex/linkonclick
11:51:36.505 (24746000)|EXECUTION_FINISHED

 

 

But if I switch the page to use a outputlink instead:

<apex:form id="form"> 
	<apex:inputText id="kbsearchtext" value="{!userkeywords}" styleClass="searchtoolstextbox" />
	<apex:actionRegion id="FullSearchActionRegion">
		<apex:outputlink id="btnFullSearch1" styleClass="btn fullsearchbutton" value="{!actionTwo}" onclick="alert('I was clicked');" >
			Full Search
			<apex:actionSupport event="onClick" action="{!getactionTwo}" status="workstatus" />
		</apex:outputlink>
	</apex:actionRegion> 			
<apex:actionStatus id="workstatus" startText="working..." stopText="" />
</apex:form>

 

 

And I hit enter in the field, nothing happens, it wont even see the string from the users input.

here is the system log:

19.0 APEX_CODE,FINEST;APEX_PROFILING,INFO;CALLOUT,INFO;DB,INFO;VALIDATION,INFO;WORKFLOW,INFO
12:10:46.852 (23228000)|EXECUTION_STARTED
12:10:46.852 (23314000)|CODE_UNIT_STARTED|[EXTERNAL]|066Q00000008nD9|VF: /apex/linkonclick
12:10:46.853 (23528000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon <init>
12:10:46.853 (23563000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.853 (23676000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{}|0x663ab9
12:10:46.853 (23716000)|STATEMENT_EXECUTE|[1]|Instance initialization: LinkOnClickCon
12:10:46.853 (23737000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.853 (23796000)|STATEMENT_EXECUTE|[3]|DeclarePropertyAccessor: public String userkeywords { get;  set;  }
12:10:46.853 (23821000)|VARIABLE_SCOPE_BEGIN|[3]|userkeywords|String|false
12:10:46.853 (23842000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.853 (23861000)|CODE_UNIT_FINISHED|LinkOnClickCon <init>
12:10:46.885 (55535000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(userkeywords)
12:10:46.885 (55570000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.885 (55720000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|userkeywords
12:10:46.885 (55744000)|CODE_UNIT_FINISHED|userkeywords
12:10:46.885 (55766000)|CODE_UNIT_FINISHED|LinkOnClickCon get(userkeywords)
12:10:46.885 (56145000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(actionTwo)
12:10:46.885 (56171000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.886 (56736000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon invoke(getactionTwo)
12:10:46.886 (56798000)|STATEMENT_EXECUTE|[1]|Static initialization: LinkOnClickCon
12:10:46.886 (56826000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.886 (56857000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
12:10:46.886 (56882000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.886 (56942000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{}|0x663ab9
12:10:46.886 (56969000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.886 (56996000)|STATEMENT_EXECUTE|[5]|Block with 9 statements
12:10:46.886 (57043000)|STATEMENT_EXECUTE|[6]|system.debug(String)
12:10:46.886 (57073000)|METHOD_ENTRY|[6]|System.debug(ANY)
12:10:46.886 (57113000)|HEAP_ALLOCATE|[6]|Bytes:38
12:10:46.886 (57135000)|HEAP_ALLOCATE|[6]|Bytes:99
12:10:46.886 (57152000)|USER_DEBUG|[6]|DEBUG|
 ACTION Two METHOD userkeywords: null
 The enter key was clicked and so this should now be called.
12:10:46.886 (57173000)|METHOD_EXIT|[6]|System.debug(ANY)
12:10:46.886 (57215000)|STATEMENT_EXECUTE|[7]|DeclareVar: String kywrds
12:10:46.886 (57237000)|VARIABLE_SCOPE_BEGIN|[7]|kywrds|String|false
12:10:46.886 (57274000)|VARIABLE_ASSIGNMENT|[7]|kywrds|null
12:10:46.886 (57294000)|VARIABLE_ASSIGNMENT|[7]|kywrds|null
12:10:46.886 (57320000)|STATEMENT_EXECUTE|[8]|Condition
12:10:46.886 (57398000)|STATEMENT_EXECUTE|[8]|Block with 1 statement
12:10:46.887 (57452000)|STATEMENT_EXECUTE|[8]|String kywrds <= Literal
12:10:46.887 (57492000)|VARIABLE_ASSIGNMENT|[8]|kywrds|"keyword"
12:10:46.887 (57515000)|VARIABLE_ASSIGNMENT|[8]|kywrds|"keyword"
12:10:46.887 (57556000)|STATEMENT_EXECUTE|[9]|String kywrds <= MethodInvocation
12:10:46.887 (57592000)|METHOD_ENTRY|[9]|system.EncodingUtil.urlEncode(String, String)
12:10:46.887 (57628000)|STATEMENT_EXECUTE|[1]|Static initialization: system.EncodingUtil
12:10:46.887 (57659000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
12:10:46.887 (57687000)|VARIABLE_SCOPE_BEGIN|[9]|s|String|false
12:10:46.887 (57720000)|VARIABLE_ASSIGNMENT|[9]|s|"keyword"
12:10:46.887 (57740000)|VARIABLE_SCOPE_BEGIN|[9]|enc|String|false
12:10:46.887 (57768000)|VARIABLE_ASSIGNMENT|[9]|enc|"UTF-8"
12:10:46.887 (57896000)|METHOD_EXIT|[9]|system.EncodingUtil.urlEncode(String, String)
12:10:46.887 (57928000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"keyword"
12:10:46.887 (57951000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"keyword"
12:10:46.887 (57988000)|STATEMENT_EXECUTE|[10]|system.debug(String)
12:10:46.887 (58011000)|METHOD_ENTRY|[10]|System.debug(ANY)
12:10:46.887 (58041000)|HEAP_ALLOCATE|[10]|Bytes:44
12:10:46.887 (58064000)|HEAP_ALLOCATE|[10]|Bytes:47
12:10:46.887 (58081000)|USER_DEBUG|[10]|DEBUG|

 METHOD getactionTwo() - keywords: keyword
 

12:10:46.887 (58102000)|METHOD_EXIT|[10]|System.debug(ANY)
12:10:46.887 (58142000)|STATEMENT_EXECUTE|[11]|DeclareVar: System.PageReference ref
12:10:46.887 (58164000)|VARIABLE_SCOPE_BEGIN|[11]|ref|PageReference|true
12:10:46.887 (58197000)|HEAP_ALLOCATE|[11]|Bytes:32
12:10:46.887 (58276000)|HEAP_ALLOCATE|[11]|Bytes:38
12:10:46.887 (58334000)|STATEMENT_EXECUTE|[12]|system.debug(String)
12:10:46.887 (58358000)|METHOD_ENTRY|[12]|System.debug(ANY)
12:10:46.887 (58386000)|METHOD_ENTRY|[12]|System.PageReference.getUrl()
12:10:46.888 (58436000)|METHOD_EXIT|[12]|System.PageReference.getUrl()
12:10:46.888 (58460000)|HEAP_ALLOCATE|[12]|Bytes:68
12:10:46.888 (58483000)|HEAP_ALLOCATE|[12]|Bytes:71
12:10:46.888 (58500000)|USER_DEBUG|[12]|DEBUG|

 METHOD getactionTwo() - pageRef: /apex/knowledge?keywords=keyword
 

12:10:46.888 (58521000)|METHOD_EXIT|[12]|System.debug(ANY)
12:10:46.888 (58557000)|STATEMENT_EXECUTE|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58582000)|METHOD_ENTRY|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58611000)|METHOD_EXIT|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58641000)|STATEMENT_EXECUTE|[14]|Return
12:10:46.888 (58674000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.888 (58697000)|CODE_UNIT_FINISHED|LinkOnClickCon invoke(getactionTwo)
12:10:46.888 (58726000)|CODE_UNIT_FINISHED|LinkOnClickCon get(actionTwo)
12:10:46.899|CUMULATIVE_LIMIT_USAGE
12:10:46.899|LIMIT_USAGE_FOR_NS|(default)|
  Number of SOQL queries: 0 out of 100
  Number of query rows: 0 out of 10000
  Number of SOSL queries: 0 out of 20
  Number of DML statements: 0 out of 100
  Number of DML rows: 0 out of 10000
  Number of script statements: 10 out of 200000
  Maximum heap size: 0 out of 3000000
  Number of callouts: 0 out of 10
  Number of Email Invocations: 0 out of 10
  Number of fields describes: 0 out of 100
  Number of record type describes: 0 out of 100
  Number of child relationships describes: 0 out of 100
  Number of picklist describes: 0 out of 100
  Number of future calls: 0 out of 10
  Number of find similar calls: 0 out of 10
  Number of System.runAs() invocations: 0 out of 20

12:10:46.899|CUMULATIVE_LIMIT_USAGE_END

12:10:46.899 (69855000)|CODE_UNIT_FINISHED|VF: /apex/linkonclick
12:10:46.899 (69877000)|EXECUTION_FINISHED

 But when I physically click the button it works, redirects to the correct page, and see's the users input text.

 

 

So is this a bug with salesforce?

 

 

 

 

 

 

1 replies

Taking the developer certification test and have questions...

I am not, how you would say, a normal learner... And am nervous about the upcoming test, anyone take it before? What is there to expect, like should I be trying to memorize terms of Some sort? I hope the test is just to build an app and not written cause I am really bad at explaining in words what I am would need to do, vs just doing it.... do they have a dyslexic version of the test? LOL?

 

I do have a copy of the both dev 401 and dev 501 work books but they seem kinda of lacking in content. like its only the slide show that a techer would use and not the text they would say... i dont know if that makes sence...

 

IDK i just really want to do well on the test and want to know what i sould expect/study.....

 

Thanks!

 

2 replies

INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY issue

I created an escalation form and in it there is the ability to attach files it uses a custom controller and VF page. This works fine for all of our onsite users (users that don't need to authenticate / do the challenge user email), all profiles, they can attach files to the form/case without any issues.  But 2 of our user profiles, if they are offsite, get this error when trying to attach files:

 

System.DmlException: Insert failed. First exception on row 0; first error: INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY, insufficient access rights on cross-reference id: []

 

and i looked up the error:

 

INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY

    An operation affects an object that is cross-referenced by the specified object, but the logged-in user does not have sufficient permissions on the cross-referenced object. For example, if the logged-in user attempts to modify an account record, that user might not have permission to approve, reject, or reassign a ProcessInstanceWorkitem that is submitted after that action.

 

But like I said these same users/user profiles ARE able to attach files through my form when logging in 'onsite'.I tried to compare the the the difference between the profiles but since there is no easy way to do that its going to take me a while.

 

Does anyone know what permissions/security could be affecting this?

 

2 replies

unable to update custome setting from force.com sites

Ok i give up and need some help....

 

I have pageRefrenece method that needs to generate a list of strings for the search auto complete to use, based on search params and cache time. (This is all using force.com sites) So when the user goes to search i first check to see if any of the params have changed by comparing them to a saved custom setting that holds the last searched data. If its a new search or one of the params have changed, the method updates the list of strings accordingly and then updates the custom setting with the new search params... this is where it is failing.

 

As a part of trouble shooting i took the block of code and put it in the Execute Anonymous and ran it with more system.debug lines to see why it might be failing.... but no error this time. In the system logs for the page, when i run it i see the error System.LimitException: DML currently not allowed as shown below:

 

16:06:07.604 (2914726000)|STATEMENT_EXECUTE|[482]|Try
16:06:07.604 (2914754000)|STATEMENT_EXECUTE|[482]|Block with 2 statements
16:06:07.604 (2914795000)|STATEMENT_EXECUTE|[483]|database.update(SOBJECT:SelfServiceSettings__c)
16:06:07.604 (2915155000)|METHOD_ENTRY|[483]|Database.update(SObject)
16:06:07.604 (2915213000)|HEAP_ALLOCATE|[483]|Bytes:8
16:06:07.604 (2915246000)|DML_BEGIN|[483]|Op:Update|Type:SelfServiceSettings__c|Rows:1
16:06:07.604 (2915291000)|EXCEPTION_THROWN|[483]|System.LimitException: DML currently not allowed
16:06:07.604 (2915384000)|METHOD_EXIT|[483]|Database.update(SObject)
16:06:07.605 (2915453000)|METHOD_EXIT|[493]|SelfServiceTemplateCon.titleSearch()
16:06:07.605 (2915490000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED

 

but when i run the block in the Execute Anonymous the logs dont show the same error:

 

15:58:57.903 (129162000)|STATEMENT_EXECUTE|[27]|Try
15:58:57.903 (129190000)|STATEMENT_EXECUTE|[27]|Block with 2 statements
15:58:57.903 (129240000)|STATEMENT_EXECUTE|[28]|database.update(SOBJECT:SelfServiceSettings__c)
15:58:57.903 (129275000)|METHOD_ENTRY|[28]|Database.update(SObject)
15:58:57.903 (129344000)|HEAP_ALLOCATE|[28]|Bytes:8
15:58:57.904 (129386000)|DML_BEGIN|[28]|Op:Update|Type:SelfServiceSettings__c|Rows:1
15:58:57.904 (129529000)|HEAP_ALLOCATE|[EXTERNAL]|Bytes:8
15:58:57.930 (156215000)|DML_END|[28]
15:58:57.930 (156272000)|METHOD_EXIT|[28]|Database.update(SObject)
15:58:57.930 (156324000)|STATEMENT_EXECUTE|[29]|system.debug(String)

 

I thought the issue might be the 'with sharing' i had on the class but it still failed even when i removed that...

 

here is the code....

 

string lang = 'en';
string prod = 'lmipro2';
list<string> titleListToShow = new List<string>();
List<string> doctypes = new List<string>();
//normally more than one added to list but for testing lets just deal with one
doctypes.add('Video__kav');	
if(selfservicehelperclass.seeIfNewListIsNeeded(doctypes, lang, prod) || titleListToShow == null){
  titleListToShow = selfservicehelperclass.getAllTitleLists(doctypes, lang, prod);
  system.debug('\n\n in titleSearch titleListToShow: ' + titleListToShow + '\n\n ');
  string dcToSave;
  for(string stype: doctypes){
    if(selfservicehelperclass.CheckForNullString(dcToSave)){
      dcToSave = dcToSave + ',' + stype;
    }else{
      dcToSave = stype;
    }
  }
  system.debug('\n\n in titleSearch dcToSave: ' + dcToSave + '\n\n ');
  SelfServiceSettings__c selfSerSet = SelfServiceSettings__c.getOrgDefaults();
  system.debug('\n\n in titleSearch selfSerSet before update: ' + selfSerSet + '\n\n ');
  selfSerSet.LastTitleSearch__c = datetime.now();
  selfSerSet.docTypesSearched__c = dcToSave;
  try{
    database.update(selfSerSet);
    system.debug('\n\n in titleSearch sss: ' + selfSerSet + '\n\n ');
  }catch(exception e){
    system.debug('\n\n in titleSearch e: ' + e + '\n\n ');
  }
}

 

 

3 replies

Issue with Apex:outputlink and forced click

Problem:

I have a search field in the case view that needs to search and redirect to a 'full search' page when a users hits enter in the field.

 

The enter part isn't an issue, the issue is that since this is inside the case layout page, I can not use a commandbutton/ commandlink since if I do it would redirect to the page but it will show inline=1 in the URL and thus treat it as an inline page and hide the header/sidebar. If I use the output link it will go to the page and not add inline=1 in the URL and show the header. BUT if I use the outputlink, when I force a click on the button, it performs the method, but not the redirect, so it just sits there.

 

In my method I put in system.debug and watched the system log, it showed that it did reach the method and did what was in it, but once it got to the return part with the new page reference, it just didn't do it. If I were to physically click the button instead of having the event listener do a jQuery .click() it will refresh to the new page.

 

To make sure it was nothing on the page that was wrong, or to see if it was just an outputlink, I did a test page with just simple methods and nothing in it but the required for testing. First i tested the commandlink/commandbutton:

 

 

<apex:page controller="LinkOnClickCon">
<apex:includeScript value="{!URLFOR($Resource.knowledgeTicket, '/jquery-1.4.2.min.js')}"/>
<script type="text/javascript" language="JavaScript">
jQuery.noConflict();
jQuery(document).ready(function() {
jQuery('.searchtoolstextbox').keypress(function(e) {
	code = e.keyCode ? e.keyCode : e.which;
	//alert(code.toString());
	if (code.toString() == 13){
		e.preventDefault();
		if(jQuery('.searchtoolstextbox').val().length >= 3){
			jQuery('.fullsearchbutton').click();		 		
		}
	}			  
});
}); 
</script>
<apex:form id="form">
	<apex:inputText id="kbsearchtext" value="{!userkeywords}" styleClass="searchtoolstextbox" />
	<apex:actionRegion id="FullSearchActionRegion">
		<apex:commandlink id="btnFullSearch1" styleClass="btn fullsearchbutton" action="{!getactionTwo}" onclick="alert('I was clicked');" value="Full Search">
			<apex:actionSupport event="onClick" action="{!getactionTwo}" status="workstatus" />
		</apex:commandlink>
	</apex:actionRegion> 			
<apex:actionStatus id="workstatus" startText="working..." stopText="" />
</apex:form>
</apex:page>

 

 

and controller:

 

public with sharing class LinkOnClickCon {

public string userkeywords{get; set;}

Public pagereference getactionTwo(){
	system.debug('\n ACTION Two METHOD userkeywords: '+userkeywords+'\n The enter key was clicked and so this should now be called.');
	string kywrds = userKeywords; 
	if(kywrds == NULL || kywrds == ''){kywrds = 'keyword';}
	kywrds = EncodingUtil.urlEncode(kywrds, 'UTF-8');
	system.debug('\n\n METHOD getactionTwo() - keywords: ' + kywrds + '\n \n');
	PageReference ref = new PageReference('/apex/knowledge?keywords=' + kywrds );
	system.debug('\n\n METHOD getactionTwo() - pageRef: ' + ref.getUrl() + '\n \n');
	ref.setRedirect(true);
	return ref;
}
}

 With the commandlink/command button it works, it redirects to the new page (but like I said earlier, if I use this in the case layout it will redirect with a URL pram of inline=1 witch is bad).

 

The system log:

 

 

19.0 APEX_CODE,FINEST;APEX_PROFILING,INFO;CALLOUT,INFO;DB,INFO;VALIDATION,INFO;WORKFLOW,INFO
11:51:36.499 (18334000)|EXECUTION_STARTED
11:51:36.499 (18404000)|CODE_UNIT_STARTED|[EXTERNAL]|066Q00000008nD9|VF: /apex/linkonclick
11:51:36.499 (18701000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(userkeywords)
11:51:36.499 (18733000)|SYSTEM_MODE_ENTER|APEX_FULL
11:51:36.500 (19058000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|userkeywords
11:51:36.500 (19090000)|CODE_UNIT_FINISHED|userkeywords
11:51:36.500 (19126000)|CODE_UNIT_FINISHED|LinkOnClickCon get(userkeywords)
11:51:36.501 (20273000)|CODE_UNIT_STARTED|[EXTERNAL]|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20308000)|SYSTEM_MODE_ENTER|APEX_FULL
11:51:36.501 (20603000)|CODE_UNIT_STARTED|[EXTERNAL]|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20648000)|METHOD_ENTRY|[1]|01pQ0000000DK56|LinkOnClickCon.LinkOnClickCon()
11:51:36.501 (20687000)|STATEMENT_EXECUTE|[1]|Static initialization: LinkOnClickCon
11:51:36.501 (20716000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
11:51:36.501 (20755000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
11:51:36.501 (20787000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
11:51:36.501 (20812000)|METHOD_EXIT|[1]|LinkOnClickCon
11:51:36.501 (20856000)|CODE_UNIT_FINISHED|LinkOnClickCon set(userkeywords,offline)
11:51:36.501 (20883000)|CODE_UNIT_FINISHED|LinkOnClickCon set(userkeywords,offline)
11:51:36.502 (21653000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon invoke(getactionTwo)
11:51:36.502 (21758000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{"userkeywords":"offline"}|0x1efb058
11:51:36.502 (21795000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
11:51:36.502 (21828000)|STATEMENT_EXECUTE|[5]|Block with 9 statements
11:51:36.502 (21888000)|STATEMENT_EXECUTE|[6]|system.debug(String)
11:51:36.502 (21924000)|METHOD_ENTRY|[6]|System.debug(ANY)
11:51:36.502 (21969000)|HEAP_ALLOCATE|[6]|Bytes:41
11:51:36.503 (22010000)|HEAP_ALLOCATE|[6]|Bytes:102
11:51:36.503 (22039000)|USER_DEBUG|[6]|DEBUG|
 ACTION Two METHOD userkeywords: offline
 The enter key was clicked and so this should now be called.
11:51:36.503 (22072000)|METHOD_EXIT|[6]|System.debug(ANY)
11:51:36.503 (22127000)|STATEMENT_EXECUTE|[7]|DeclareVar: String kywrds
11:51:36.503 (22157000)|VARIABLE_SCOPE_BEGIN|[7]|kywrds|String|false
11:51:36.503 (22201000)|VARIABLE_ASSIGNMENT|[7]|kywrds|"offline"
11:51:36.503 (22232000)|VARIABLE_ASSIGNMENT|[7]|kywrds|"offline"
11:51:36.503 (22264000)|STATEMENT_EXECUTE|[8]|Condition
11:51:36.503 (22377000)|STATEMENT_EXECUTE|[8]|Condition
11:51:36.503 (22432000)|STATEMENT_EXECUTE|[9]|String kywrds <= MethodInvocation
11:51:36.503 (22476000)|METHOD_ENTRY|[9]|system.EncodingUtil.urlEncode(String, String)
11:51:36.503 (22524000)|STATEMENT_EXECUTE|[1]|Static initialization: system.EncodingUtil
11:51:36.503 (22571000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
11:51:36.503 (22607000)|VARIABLE_SCOPE_BEGIN|[9]|s|String|false
11:51:36.503 (22648000)|VARIABLE_ASSIGNMENT|[9]|s|"offline"
11:51:36.503 (22675000)|VARIABLE_SCOPE_BEGIN|[9]|enc|String|false
11:51:36.503 (22711000)|VARIABLE_ASSIGNMENT|[9]|enc|"UTF-8"
11:51:36.503 (22859000)|METHOD_EXIT|[9]|system.EncodingUtil.urlEncode(String, String)
11:51:36.503 (22899000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"offline"
11:51:36.503 (22929000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"offline"
11:51:36.503 (22978000)|STATEMENT_EXECUTE|[10]|system.debug(String)
11:51:36.504 (23023000)|METHOD_ENTRY|[10]|System.debug(ANY)
11:51:36.504 (23060000)|HEAP_ALLOCATE|[10]|Bytes:44
11:51:36.504 (23089000)|HEAP_ALLOCATE|[10]|Bytes:47
11:51:36.504 (23115000)|USER_DEBUG|[10]|DEBUG|

 METHOD getactionTwo() - keywords: offline
 

11:51:36.504 (23145000)|METHOD_EXIT|[10]|System.debug(ANY)
11:51:36.504 (23197000)|STATEMENT_EXECUTE|[11]|DeclareVar: System.PageReference ref
11:51:36.504 (23226000)|VARIABLE_SCOPE_BEGIN|[11]|ref|PageReference|true
11:51:36.504 (23267000)|HEAP_ALLOCATE|[11]|Bytes:32
11:51:36.504 (23358000)|HEAP_ALLOCATE|[11]|Bytes:38
11:51:36.504 (23432000)|STATEMENT_EXECUTE|[12]|system.debug(String)
11:51:36.504 (23465000)|METHOD_ENTRY|[12]|System.debug(ANY)
11:51:36.504 (23503000)|METHOD_ENTRY|[12]|System.PageReference.getUrl()
11:51:36.504 (23558000)|METHOD_EXIT|[12]|System.PageReference.getUrl()
11:51:36.504 (23587000)|HEAP_ALLOCATE|[12]|Bytes:68
11:51:36.504 (23615000)|HEAP_ALLOCATE|[12]|Bytes:71
11:51:36.504 (23641000)|USER_DEBUG|[12]|DEBUG|

 METHOD getactionTwo() - pageRef: /apex/knowledge?keywords=offline
 

11:51:36.504 (23671000)|METHOD_EXIT|[12]|System.debug(ANY)
11:51:36.504 (23720000)|STATEMENT_EXECUTE|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23754000)|METHOD_ENTRY|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23791000)|METHOD_EXIT|[13]|System.PageReference.setRedirect(Boolean)
11:51:36.504 (23829000)|STATEMENT_EXECUTE|[14]|Return
11:51:36.504 (23871000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
11:51:36.504 (23923000)|CODE_UNIT_FINISHED|LinkOnClickCon invoke(getactionTwo)
11:51:36.504 (23999000)|VF_APEX_CALL|btnFullSearch1|{!getactionTwo}|PageReference:/apex/knowledge?keywords=offline
11:51:36.505|CUMULATIVE_LIMIT_USAGE
11:51:36.505|LIMIT_USAGE_FOR_NS|(default)|
  Number of SOQL queries: 0 out of 100
  Number of query rows: 0 out of 10000
  Number of SOSL queries: 0 out of 20
  Number of DML statements: 0 out of 100
  Number of DML rows: 0 out of 10000
  Number of script statements: 9 out of 200000
  Maximum heap size: 0 out of 3000000
  Number of callouts: 0 out of 10
  Number of Email Invocations: 0 out of 10
  Number of fields describes: 0 out of 100
  Number of record type describes: 0 out of 100
  Number of child relationships describes: 0 out of 100
  Number of picklist describes: 0 out of 100
  Number of future calls: 0 out of 10
  Number of find similar calls: 0 out of 10
  Number of System.runAs() invocations: 0 out of 20

11:51:36.505|CUMULATIVE_LIMIT_USAGE_END

11:51:36.505 (24720000)|CODE_UNIT_FINISHED|VF: /apex/linkonclick
11:51:36.505 (24746000)|EXECUTION_FINISHED

 

 

But if I switch the page to use a outputlink instead:

<apex:form id="form"> 
	<apex:inputText id="kbsearchtext" value="{!userkeywords}" styleClass="searchtoolstextbox" />
	<apex:actionRegion id="FullSearchActionRegion">
		<apex:outputlink id="btnFullSearch1" styleClass="btn fullsearchbutton" value="{!actionTwo}" onclick="alert('I was clicked');" >
			Full Search
			<apex:actionSupport event="onClick" action="{!getactionTwo}" status="workstatus" />
		</apex:outputlink>
	</apex:actionRegion> 			
<apex:actionStatus id="workstatus" startText="working..." stopText="" />
</apex:form>

 

 

And I hit enter in the field, nothing happens, it wont even see the string from the users input.

here is the system log:

19.0 APEX_CODE,FINEST;APEX_PROFILING,INFO;CALLOUT,INFO;DB,INFO;VALIDATION,INFO;WORKFLOW,INFO
12:10:46.852 (23228000)|EXECUTION_STARTED
12:10:46.852 (23314000)|CODE_UNIT_STARTED|[EXTERNAL]|066Q00000008nD9|VF: /apex/linkonclick
12:10:46.853 (23528000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon <init>
12:10:46.853 (23563000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.853 (23676000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{}|0x663ab9
12:10:46.853 (23716000)|STATEMENT_EXECUTE|[1]|Instance initialization: LinkOnClickCon
12:10:46.853 (23737000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.853 (23796000)|STATEMENT_EXECUTE|[3]|DeclarePropertyAccessor: public String userkeywords { get;  set;  }
12:10:46.853 (23821000)|VARIABLE_SCOPE_BEGIN|[3]|userkeywords|String|false
12:10:46.853 (23842000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.853 (23861000)|CODE_UNIT_FINISHED|LinkOnClickCon <init>
12:10:46.885 (55535000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(userkeywords)
12:10:46.885 (55570000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.885 (55720000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|userkeywords
12:10:46.885 (55744000)|CODE_UNIT_FINISHED|userkeywords
12:10:46.885 (55766000)|CODE_UNIT_FINISHED|LinkOnClickCon get(userkeywords)
12:10:46.885 (56145000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon get(actionTwo)
12:10:46.885 (56171000)|SYSTEM_MODE_ENTER|APEX_FULL
12:10:46.886 (56736000)|CODE_UNIT_STARTED|[EXTERNAL]|01pQ0000000DK56|LinkOnClickCon invoke(getactionTwo)
12:10:46.886 (56798000)|STATEMENT_EXECUTE|[1]|Static initialization: LinkOnClickCon
12:10:46.886 (56826000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.886 (56857000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
12:10:46.886 (56882000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.886 (56942000)|VARIABLE_ASSIGNMENT|[EXTERNAL]|this|{}|0x663ab9
12:10:46.886 (56969000)|SYSTEM_MODE_ENTER|APEX_SHARING_HONORED
12:10:46.886 (56996000)|STATEMENT_EXECUTE|[5]|Block with 9 statements
12:10:46.886 (57043000)|STATEMENT_EXECUTE|[6]|system.debug(String)
12:10:46.886 (57073000)|METHOD_ENTRY|[6]|System.debug(ANY)
12:10:46.886 (57113000)|HEAP_ALLOCATE|[6]|Bytes:38
12:10:46.886 (57135000)|HEAP_ALLOCATE|[6]|Bytes:99
12:10:46.886 (57152000)|USER_DEBUG|[6]|DEBUG|
 ACTION Two METHOD userkeywords: null
 The enter key was clicked and so this should now be called.
12:10:46.886 (57173000)|METHOD_EXIT|[6]|System.debug(ANY)
12:10:46.886 (57215000)|STATEMENT_EXECUTE|[7]|DeclareVar: String kywrds
12:10:46.886 (57237000)|VARIABLE_SCOPE_BEGIN|[7]|kywrds|String|false
12:10:46.886 (57274000)|VARIABLE_ASSIGNMENT|[7]|kywrds|null
12:10:46.886 (57294000)|VARIABLE_ASSIGNMENT|[7]|kywrds|null
12:10:46.886 (57320000)|STATEMENT_EXECUTE|[8]|Condition
12:10:46.886 (57398000)|STATEMENT_EXECUTE|[8]|Block with 1 statement
12:10:46.887 (57452000)|STATEMENT_EXECUTE|[8]|String kywrds <= Literal
12:10:46.887 (57492000)|VARIABLE_ASSIGNMENT|[8]|kywrds|"keyword"
12:10:46.887 (57515000)|VARIABLE_ASSIGNMENT|[8]|kywrds|"keyword"
12:10:46.887 (57556000)|STATEMENT_EXECUTE|[9]|String kywrds <= MethodInvocation
12:10:46.887 (57592000)|METHOD_ENTRY|[9]|system.EncodingUtil.urlEncode(String, String)
12:10:46.887 (57628000)|STATEMENT_EXECUTE|[1]|Static initialization: system.EncodingUtil
12:10:46.887 (57659000)|STATEMENT_EXECUTE|[1]|ThisBlock with 1 statement
12:10:46.887 (57687000)|VARIABLE_SCOPE_BEGIN|[9]|s|String|false
12:10:46.887 (57720000)|VARIABLE_ASSIGNMENT|[9]|s|"keyword"
12:10:46.887 (57740000)|VARIABLE_SCOPE_BEGIN|[9]|enc|String|false
12:10:46.887 (57768000)|VARIABLE_ASSIGNMENT|[9]|enc|"UTF-8"
12:10:46.887 (57896000)|METHOD_EXIT|[9]|system.EncodingUtil.urlEncode(String, String)
12:10:46.887 (57928000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"keyword"
12:10:46.887 (57951000)|VARIABLE_ASSIGNMENT|[9]|kywrds|"keyword"
12:10:46.887 (57988000)|STATEMENT_EXECUTE|[10]|system.debug(String)
12:10:46.887 (58011000)|METHOD_ENTRY|[10]|System.debug(ANY)
12:10:46.887 (58041000)|HEAP_ALLOCATE|[10]|Bytes:44
12:10:46.887 (58064000)|HEAP_ALLOCATE|[10]|Bytes:47
12:10:46.887 (58081000)|USER_DEBUG|[10]|DEBUG|

 METHOD getactionTwo() - keywords: keyword
 

12:10:46.887 (58102000)|METHOD_EXIT|[10]|System.debug(ANY)
12:10:46.887 (58142000)|STATEMENT_EXECUTE|[11]|DeclareVar: System.PageReference ref
12:10:46.887 (58164000)|VARIABLE_SCOPE_BEGIN|[11]|ref|PageReference|true
12:10:46.887 (58197000)|HEAP_ALLOCATE|[11]|Bytes:32
12:10:46.887 (58276000)|HEAP_ALLOCATE|[11]|Bytes:38
12:10:46.887 (58334000)|STATEMENT_EXECUTE|[12]|system.debug(String)
12:10:46.887 (58358000)|METHOD_ENTRY|[12]|System.debug(ANY)
12:10:46.887 (58386000)|METHOD_ENTRY|[12]|System.PageReference.getUrl()
12:10:46.888 (58436000)|METHOD_EXIT|[12]|System.PageReference.getUrl()
12:10:46.888 (58460000)|HEAP_ALLOCATE|[12]|Bytes:68
12:10:46.888 (58483000)|HEAP_ALLOCATE|[12]|Bytes:71
12:10:46.888 (58500000)|USER_DEBUG|[12]|DEBUG|

 METHOD getactionTwo() - pageRef: /apex/knowledge?keywords=keyword
 

12:10:46.888 (58521000)|METHOD_EXIT|[12]|System.debug(ANY)
12:10:46.888 (58557000)|STATEMENT_EXECUTE|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58582000)|METHOD_ENTRY|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58611000)|METHOD_EXIT|[13]|System.PageReference.setRedirect(Boolean)
12:10:46.888 (58641000)|STATEMENT_EXECUTE|[14]|Return
12:10:46.888 (58674000)|SYSTEM_MODE_EXIT|APEX_SHARING_HONORED
12:10:46.888 (58697000)|CODE_UNIT_FINISHED|LinkOnClickCon invoke(getactionTwo)
12:10:46.888 (58726000)|CODE_UNIT_FINISHED|LinkOnClickCon get(actionTwo)
12:10:46.899|CUMULATIVE_LIMIT_USAGE
12:10:46.899|LIMIT_USAGE_FOR_NS|(default)|
  Number of SOQL queries: 0 out of 100
  Number of query rows: 0 out of 10000
  Number of SOSL queries: 0 out of 20
  Number of DML statements: 0 out of 100
  Number of DML rows: 0 out of 10000
  Number of script statements: 10 out of 200000
  Maximum heap size: 0 out of 3000000
  Number of callouts: 0 out of 10
  Number of Email Invocations: 0 out of 10
  Number of fields describes: 0 out of 100
  Number of record type describes: 0 out of 100
  Number of child relationships describes: 0 out of 100
  Number of picklist describes: 0 out of 100
  Number of future calls: 0 out of 10
  Number of find similar calls: 0 out of 10
  Number of System.runAs() invocations: 0 out of 20

12:10:46.899|CUMULATIVE_LIMIT_USAGE_END

12:10:46.899 (69855000)|CODE_UNIT_FINISHED|VF: /apex/linkonclick
12:10:46.899 (69877000)|EXECUTION_FINISHED

 But when I physically click the button it works, redirects to the correct page, and see's the users input text.

 

 

So is this a bug with salesforce?

 

 

 

 

 

 

SOLVED
4 replies

Using Apex to get DataCategorySelection from a specific Knowledge Article

I'm wondering if this is possible.  We're basically building a bigger, better, more scalable editor interface, pretty much replacing components that don't scale (list views, filters) with our own VF, and one of the requests I got was to grab the data categories associated with the article when listing them.

 

Should something like this work?

 

Select f.Localized_Title__c, f.Id, (Select ParentId, DataCategoryGroupName, DataCategoryName From DataCategorySelections) From FAQ__kav f where PublishStatus = 'Online'

 

I know I'd have to iterate through the data categories in separate logic before binding to VF (or do it in an apex:repeat), but theoretically, no issues here right?

2 replies

INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY issue

I created an escalation form and in it there is the ability to attach files it uses a custom controller and VF page. This works fine for all of our onsite users (users that don't need to authenticate / do the challenge user email), all profiles, they can attach files to the form/case without any issues.  But 2 of our user profiles, if they are offsite, get this error when trying to attach files:

 

System.DmlException: Insert failed. First exception on row 0; first error: INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY, insufficient access rights on cross-reference id: []

 

and i looked up the error:

 

INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY

    An operation affects an object that is cross-referenced by the specified object, but the logged-in user does not have sufficient permissions on the cross-referenced object. For example, if the logged-in user attempts to modify an account record, that user might not have permission to approve, reject, or reassign a ProcessInstanceWorkitem that is submitted after that action.

 

But like I said these same users/user profiles ARE able to attach files through my form when logging in 'onsite'.I tried to compare the the the difference between the profiles but since there is no easy way to do that its going to take me a while.

 

Does anyone know what permissions/security could be affecting this?

 

SOLVED
9 replies

Filtering Knowledge using 'with data category' and strings

I am trying to pass a string representing a data category to a controller and then filter my SOQL query for knowledge based on that.

 

Ideally I would like to do something like:

 

 

    public String release { get; set; }
    
    public List<FAQ__kav> getFAQsForRelease()
    {
        List<FAQ__kav> faqlist = [select id, Title, Answer__c from FAQ__kav WHERE PublishStatus = 'Online' WITH DATA CATEGORY Releases__c ABOVE release];  
        return faqlist;
    }

 

but I can't figure out if there is any possible way to convert the string object 'release' into an datacategory type. Maybe a helper function or something?

 

I realize a big block of if / else if statements would do the trick, but I am hoping there is a cleaner solution. Thanks in advance.

  • April 20, 2010
  • Like
  • 0
11 replies

VF page displayed without sidebar and header

Hi, 

 

I have a VF page that displays details for custom object. 

 

This VF page is accessed via a CommandButton, which calls a method in the Controller --

    PageReference SRPage = new PageReference('/'+customObject.id);

 

The resulting VF page is displayed in the existing window without any sidebar or header.  I would like it to display the SF sidebar and header.  How can I achieve this?

 

Thanks.

  • March 08, 2010
  • Like
  • 0
12 replies

returning a PageReference from Controller and Salesforce appends ?inline=1 to the URL

Hello All,

 

I have a custom page and controller.  I am trying to do some error handling within the controller as such:

 

public PageReference sendMail2PM(){
   

string PMID = [select Deliverable_Owner__c from P4_Contract_Deliverable__c where id = :this.cd.id].Deliverable_Owner__c;

 

string PMEmail = [select email from contact where id=:PMID].email;

 

if(PMEmail==null){
    PageReference errorPage = new PageReference('https://cs1.salesforce.com/apex/errorLanding');
    errorPage.setRedirect(true);
    return errorPage;
    }

 

}

 

My problem is that when the redirect happens, somehow "inline=1" gets appended to the URL.  It seems that when the inline parameter is present then the page renders without headers or sidebars.  I want the header and sidebar so users know they are still in saleforce.

 

Where is the "inline=1" coming from and how do I get rid of it?  Or else how do I make the redirect happen with headers and sidebars?

  • February 05, 2009
  • Like
  • 0
SOLVED
37 replies

user hitting enter key on inputfield in tabbed view

I hope someone can help me.  I have a VF page that includes 4 tabbed sections.  One of them is a custom search tab.  When the user types their criteria (an account name) into the inputtext box, and clicks my search button, everything works great.  If the user types in their criteria, then presses "Enter",  the page refreshes and takes the user back to the first tab (my search tab is the fourth tab).
How can I get pressing enter to be the same as clicking the button?

Thanks in advance!!

Jim
  • August 27, 2008
  • Like
  • 1